In Gray Iron : Recent literature has shown once again that effects obtained from the combined addition of two alloying elements are often greater than the added effects of the individual elements. This same type of synergistic effect has long been recognized with regard to the role of Calcium and Barium in cast iron inoculation. The combination of Calcium and Barium in 75% FeSi-Ca+Ba provides a potent nucleating effect with about 40% less 75% FeSi-Ca+Ba needed to obtain equivalent chill depths produced by the use of standard inoculating grade ferrosilicons. At similar addition rates 75% FeSi-Ca+Ba produced dramatically lower chill depths than standard inoculants at all Carbon equivalent levels. 75% FeSi-Ca+Ba is particularly useful in higher strength 3.6-3.8 Carbon equivalent irons, in which inoculation would be expected to have the greatest effect on improvement of mechanical properties. The combination of Calcium and Barium minimizes undercooling and promotes eutectic solidification with Type A graphite and a pearlitic matrix. The comparatively high Silicon content of this alloy further serves to increase eutectic cell count, ensuring optimum properties from a given iron analysis. Because the alloy is based on 75% ferrosilicon, its reaction with liquid is exothermic, ensuring excellent dissolution and consistency of results.
In Ductile Iron : Alloys containing over 70% silicon have long been the favored inoculation material for ductile iron. In special carbide prone work, many commercial foundries have reported increased nucleation and elimination of chill because of the more potent effect of Calcium plus Barium. During a two day trial in a commercial foundry comparing a Calcium plus Barium alloy, a regular Calcium bearing ferrosilicon and a high Aluminum European inoculant, the Calcium plus Barium alloy produced nodule counts 18% higher than either of the other two alloys. 75% FeSi-Ca+Ba can be used in all grades of ductile iron.
Size | Si % | Ca % | Ba % | Al % | |||
---|---|---|---|---|---|---|---|
3/8″x20M | 70.0-79.0% | 0.80-1.50% | 0.80-1.50% | 1.50% max. |
Size :
3/8″x20M
Effective Date :
5/12/08
Please Note :
Product specifications are subject to change.
For availability and proper application :
Please contact your local Miller and Company LLC Area Sales Manager.
[printfriendly]
© Miller and Company 2018
You can add any HTML here (admin -> Theme Options -> Promo Popup).
We suggest you create a static block and put it here using shortcode